The HIGHLite Laser 12k delivering a stunning 12,000 Lumen output and boasts 20,000 hours of stable solid-state illumination with a WUXGA resolution.The projector was developed with an emphasis on ‘Fit and Forget’ – meaning that installers and system integrators can deploy the projector and need not worry about lamp changes or expensive maintenance cycles.
12,000 Lumens (+/- 10%)
2,000:1 Contrast Ratio
3-chip DLP® 0.67″ DarkChip™ DMD™
1920 x 1200 pixels native, +/- 12° tilt angle
Fast transit pixels for smooth greyscale and improved contrast.
VIDEO & GRAPHICS PROCESSING
HDMI 1.4 for Side by Side, Frame Packing & Top Bottom Formats.
Triple Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display).
Dual Pipe Processing: Two sources in parallel for Left and Right Eyes.
High Bandwidth Digital & Analog Receiver with 10 Bit A-D.
3GSDI with loop-through.
Synchronisation of active glasses or polarising switcher.
The projector automatically detects interlaced video and implements 3:2 or 2:2 extraction as appropriate, with pixel based, motion adaptive interpolation and auto cadence correction.
24p and 1080p native display.
Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, and Image Rotation.
Blanking control for custom input window sizing.
High Bit Depth Edge Blending
Built in support for transmission of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
Allows projector to be placed up to 100m from source with low cost cabling.
3D Formats Supported
Side By Side (half)
Top and Bottom
Fixed and Zoom Lenses from 0.77:1 – 6.76:1